Wax Coat
Part No. #A9101
Wax Coat includes clear Synthetic wax and a corrosion additive base semi-flowable protection coating. Flows into & protects innermost cavies. It provides superior protection. Neutralizes surface moisture.
Specification
Application Areas :
It is safe and effective protection coating for various kinds of metal moulds, moving parts of the machines, links, chains, gears, bearings, and many more. Ideal stand-by and storage protection for spare parts with the possibility of direct installation. Easily removable coating.
Precautions :
Can is under high pressure. Do not puncture or burn it even when empty—store below 50℃. Use in well-ventilated areas. Do not spray this wax coat into or around open flames and sparks. Exposure to heat exceeding 120℃ may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at standard ambient temperature and has a shelf life of not less than 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked flame.
Technical Service :
AARNA LUBE PVT LTD. specialized lubricants and oils manufacturers in Maharashtra, provides technical support under the research and development program. For any inquiries, contact us.
Packing :
300gm/500 ml, Aerosol Cans.
Technical Data
Standard
Conditions
Unit
Value
Solid Lubricants
Type
Synthetic wax
Solvents
Type
Special boiling point gasoline
Additives
Type
Corrosion protection
Film Layer
Optimum Layer Thickness
μm
35-40 microns
Application Temperature
°C
Room temperature
Drying Time
at 20°C
h
0.1
Application-Specific Data
Density
°+20°C
g/ml
0.7 – 0.78
Colour
Translucent
Film Type
Waxy, Dry
Operating Temperatures
Lower Operating Temperature
°C
- 30
Upper Operating Temperature
°C
+65
DISCLAIMER
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Order Now
