Part No. #A9110
This Teﬂon Gel from is fortified with reﬁned Teﬂon polymer, non-staining, thick, white multi-purpose lubricant. Protects equipment against rust, oxidation, and wear. Excellent adhesion resists throwing oﬀ, outstanding load-carrying ability. Our Teflon gel is high viscosity, high temperature, and extreme pressure Teﬂon get packed in convenient aerosol spray packing for multi-service industrial use. It reduces re-lubrication frequency, eases maintenance & extends part life.
Application Areas :
Valves, chains, gears, bearings, conveyors, cams, wire rope hoists, roller, slide bearings, o-rings, manifold heat valves, ejector pins, and multi-service lubricant.
Teflon Gel can is under high pressure. Do not puncture or burn it even when empty—store below 50℃. Use in well-ventilated areas. Do not spray this wax coat into or around open ﬂames and sparks. Exposure to heat exceeding 120℃ may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at standard ambient temperature and has a shelf life of not less than 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked ﬂame.
Technical Service :
AARNA LUBE PVT LTD. the best quality industrial lubricants in India manufacturers provides technical support under the research and development program. For any inquiries, contact us.
300gm/500 ml, Aerosol Cans.
Special boiling point gasoline
Optimum Layer Thickness
0.7 – 0.78
Lower Operating Temperature
Upper Operating Temperature
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.