Red Insulating Varnish
Part No. #A9117
Challenging, flexible, air-dry insulation and a protective coating. Thoroughly penetrates overhang winding portion & coils, seals out dust and moisture. Red Insulating Varnish are designed to be used as a finishing coat over existing impregnating varnishes to provide class H insulation.
Specification
Application Areas :
Red Insulating Varnish is flexible, conformal finishing, insulation and protection on windings and coils. Providing Insulation for thermostats, High-voltage circuits, commutator ends, Bus-bars, joints and connections, etc.
Precautions :
Can is under high pressure. Do not puncture or incinerate it even when empty—store below 50℃. Use in well-ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat exceeding 120℃ may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at standard ambient temperature and has a shelf life of not less than 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked flame.
Technical Service :
AARNA LUBE PVT LTD. is among the top 10 lubricant companies in India, provides technical support under the program of research and development. For any enquiry contact us at details provided below.
Packing :
300gm/500 ml, Aerosol Cans.
Chemical And Physical Properties
Flash Point
50℃
Appearance
Red
Solubility In H2o
Insoluble
Vapor Density In Air
>1
Dry Time
10-15 Minutes
Dielectric Strength
>2200 V/ml
Vapor Pressure
48-55 Psi@ 35℃
Odour
Hydrocarbon
Stability
Stable
Boiling Point ℃
105-305(Concentrate)
Specific Gravity
0.85
Full Cure
12-24 Hrs
Full Cure
12-24 Hrs
Ph Value
N/A
DISCLAIMER
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Order Now
