Moly Spray
Part No. #A9112
AARNA Moly Spray is a dry lubricant of molybdenum disulfide, appropriate for temperatures up to 450℃. AARNA Moly Spray built a long-life homogeneous, adherent heavy load and temperature change resistant lubricant film, thus assuring smooth sliding and reducing the friction coefficient.
Technical Data
Appearance : Solid (Greyish Black)
Relative Density : 1000 g/cc
Odour : Characteristic
Drying Time : 10 Minutes at +25℃
Specification
Application Areas :
Spray this Moly Spray at a distance of 10-12″ from the surface for a uniform layer. Shake well before use till the ball moves smoothly. For each use, turn the can upside down & spray till only the propellant gas comes out.
Precaution :
Can is under high pressure. Do not puncture or incinerate it even when empty—store below 50℃. Use in well-ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at average ambient temperature and has a shelf life of at least 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked flame.
Technical Service :
AARNA LUBE PVT LTD. specialized lubricants and oils manufactures and suppliers provides technical support under the research and development program. For any inquiries, contact us.
Packing :
300gm/500 ml, Aerosol Cans.
DISCLAIMER
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Order Now
