Dry Graphite
Part No. #A9109
Dry Graphite's formulation consists of graphite nanoparticles and silicon polymer, making it a top contender for high-temperature applications (up to 520℃).
Technical Data
Appearence : Dark Gray
Density at +27℃: 720 g/cc Inhouse
Friction Coef. : 0.123
Drying Time : 3-4 Minute +25℃
Specification
Application Areas :
Pre-treatment of surfaces, Casting under pressure, aluminum (extrusion), and glasswork (molds).
Precautions :
Can is under high pressure. Do not puncture or burn it even when apparently empty—store below 50℃. Use in well-ventilated areas. Do not spray this Dry Graphite Spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at standard ambient temperature and has a shelf life of not less than 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked flame.
Technical Service :
AARNA LUBE PVT LTD., supplier of specialized lubricants and oils manufacturer, provides technical support under the research and development program. For any inquiries, contact us.
Packing :
300gm/500 ml, Aerosol Cans.
DISCLAIMER
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Order Now