Boron Nitride
Part No. #A9119
It is an insulator and white-colored dry film designed for dry film lubrication on surfaces submitted to frictional contact at high temperatures (>1200℃), contact with the material in fusion, wear by fretting corrosion, etc.
Technical Data
Form : Aerosol
Color : Brownish
Odour : Characteristic
Water Solubility : Nil
Specification
Application Areas :
Boron Nitride aerosol may be used as a coating for High temperature release (crucibles, molds, transition plates), High temperature lubrication, Corrosion resistance to molten metals, molten glasses, and slags, Anti-oxidation barriers, anti-oxidation barriers during hot pressing operations.
Instruction :
Shake very well before use. Store the can vertically for the use and storage. Spray over the surface from a 30 cm distance. For best performance, wait some minutes to facilitate sticking and actuation of the Boron Nitride.
Storage & Shelf Life :
Store this Aarna Lube Boron Nitride lubricant in a cool, dry place away from direct sunlight. The minimum shelf life is 12 months from the date of manufacturing.
Warranty :
Each unit is unconditionally warranted against any defect for a minimum period of 12 months (1 Year) from the date of supply.
Caution :
Do not Boron Nitride spray into or around open flame and spark. Spray in a ventilated area. Exposure to heat or sunlight. Where temperature exceeds 120 F. May cause bursting. Do not puncture on incinerate the can. Keep the can in a cool, dry place for optimum shelf life.
Packing :
300gm/500 ml, Aerosol Cans.
DISCLAIMER
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Order Now
