Mould Release (Silicon Free)
Part No. #A9110
Non-Silicon Paintable Heavy duty mould release agent.
Appearance : Colourless
Solubility In H2O : Insoluble
Odour : Odourless
Relative Density : 0.78
Application Areas :
Mould Release is suitable for all types of rubber and plastic mouldings. It is particularly effective for injection or compression moulding of plastic, rotational moulding of thermoplastic and compression or vacuum bag moulding of thermoset resins.
This Mould release Can is under high pressure. Do not puncture or burn it even when apparently empty—store below 50℃. Use in well-ventilated areas. Do not spray Mould Release into or around open ﬂames and sparks. Exposure to heat exceeding 120℃ may cause the busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at standard ambient temperature and has a shelf life of not less than 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked ﬂame.
Technical Service :
AARNA LUBE PVT LTD. suppliers of lubricant brand in India, provides technical support under the research and development program. For any inquiries, contact us.
300gm/500 ml, Aerosol Cans.
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.