Corrosion Inhibitor Spray

Part No. #A9107​

Synthetic oil and additive-based semi-flowable coating. This Corrosion Inhibitor Spray flows into and protects the innermost cavies. It provides high-performance protection. Neutralize surface moisture.








Technical Data

Base Oil Type : Mineral

Odour : Colorless Liquid Visual

Additives Type : VCI-Corrosion Protection

Viscosity At +40℃ : Less than 0.2 cst

Density :  +20°C g/ml 0.820

Colour : Clear/Green

Film Type : Oily

Film Thickness : 25 – 55 microns

Corrosion Protection : Upto 12 months

Lower Operating Temperature : -37°C

Upper Operating Temperature : +75°C

Corrosion Inhibitor Spray

Part No. #A9107​

Synthetic oil and additive-based semi-flowable coating. This Corrosion Inhibitor Spray flows into and protects the innermost cavies. It provides high-performance protection. Neutralize surface moisture.

Technical Data

Base Oil Type : Mineral

Odour : Colorless Liquid Visual

Additives Type : VCI-Corrosion Protection

Viscosity At +40℃ : Less than 0.2 cst

Density :  +20°C g/ml 0.820

Colour : Clear/Green

Film Type : Oily

Film Thickness : 25 – 55 microns

Corrosion Protection : Upto 12 months

Lower Operating Temperature : -37°C

Upper Operating Temperature : +75°C

Specification

Application Areas :
To protect semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, piston rods, wire cables, drag cables, etc., during storage and transport, even in extreme weather like coastal and marine atmospheres. 

Protects plastic injection molds used to manufacture precision electronic components for preservation under high corrosive loading, e.g., in industrial atmospheres, outdoor weathering under roofs of semi-finished products, finished products, parked vehicles, agricultural and construction machines, in constructions and civil engineering, etc.

Precautions  :
Can is under high pressure. Do not puncture or burn it even when apparently empty—store below 50℃. Use in well-ventilated areas. Do not spray this Corrosion Inhibitor Spray into or around open flames and sparks. Exposure to heat exceeding 120℃ may cause the busting of the can. Keep out of reach of children.

Storage & Shelf Life :
The product may be stored at average ambient temperature and has a shelf life of at least 2 years with correct storage. Aerosol should always be kept below 50℃, away from direct heat and naked flame.

Technical Service :
AARNA LUBE PVT LTD., lubricant manufacturer and supplier in Mumbai, provides technical support under the research and development program. For any inquiries, contact us.

Packing :
300gm/500 ml, Aerosol Cans.

Properties

First and big advantage of Corrosion Inhibitor Spray that it is Eco-friendly.

It is Free from chlorinated solvents.

Provides Corrosion Protection for up to 12 months.

It provides lubrication, protects the is resistant to UV rays.

Free from nitrites, phosphates, chromates and other heavy metals.

It is highly effective due to multifunctional VCI corrosion inhibitors.

DISCLAIMER

Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.

Order Now


Aarna Lube Private Limited is the manufacturer and marketing partner of Brugarolas India Pvt. Ltd.

Phone:

+91 7410006010/11/12/13/14

Mail us:

sales@aarnalube.com

Address:

105 Richa Trade Centre, Opp Nexa Show Room, Above Suman Steel, Sativali- Vasai East Pincode- 401208.

All Rights Reserved By Aarna Lube Pvt. Ltd.

Scroll to Top